Development and prototyping within shorter time frames CUSTOMER-SPECIFIC MAGNETS FOR THE AUTOMOTIVE INDUSTRY | RoboticsTomorrow

2022-09-02 20:53:32 By : Mr. Rocky Wang

Online Robotics Trade Magazine Industrial Automation, Robots and Unmanned Vehicles

If you do not have a RoboticsTomorrow partner account, please register - it's free!

Visit http://www.goudsmitmagnets.com for further information

Finding the right magnet for an electric motor, actuator or sensor can be a difficult and time-consuming process for automotive suppliers. In addition to supplying magnetic components and assemblies, Goudsmit Magnetics based in Waalre, also offer services that speed up the time-to-market for automotive manufacturers. At the IZB in Wolfsburg (Stand 6-6314) the company will demonstrate its knowledge of magnetic calculations, FEM calculations and 3D simulations that contribute to the development of a magnet or assembly that not only meets all requirements but, even before the prototyping phase, provides certainty about the correct operation.

Finding the right magnet for an electric motor, actuator or sensor can be a difficult and time-consuming process for automotive suppliers. In addition to supplying magnetic components and assemblies, Goudsmit Magnetics based in Waalre, also offer services that speed up the time-to-market for automotive manufacturers. At the IZB in Wolfsburg (Stand 6-6314) the company will demonstrate its knowledge of magnetic calculations, FEM calculations and 3D simulations that contribute to the development of a magnet or assembly that not only meets all requirements but, even before the prototyping phase, provides certainty about the correct operation. Magnets are present in various places in cars, including the gearbox, sensors, brakes, water pump, engines, ignition coil and start generator, and in the currently widely used 'lane departure warning', which emits a warning beep or vibration signal when the vehicle strays off the road. Magnets play an important role in these critical safety systems. The quality of magnets is essential to guarantee optimal operation. Magnetic measurements and quality control Measurements are an important part of determining the quality of a magnet. These measurements provide automotive suppliers with guarantees and are a standard part of the IATF16949 process. The CPK value that results from these measurements, among others, is part of the statistical process control and says something about the way in which a magnet supplier controls its process. The higher the CPK value, the better it is. It makes the statistical chance of failure of products such as motors, actuators or sensors negligible. Moreover, since the output control of the magnet supplier is also the input control of customers, this also reduces the chance of failure of once delivered cars, machines or systems. More Headlines Aeva To Showcase 4D LiDAR Technology At ADAS & Autonomous Vehicle Technology Expo 2022 Unmanned Maritime Systems Technology USA 2022: Conference Attendees Revealed Hypertherm announces major update of its Robotmaster offline programming software LUCID to Showcase New Camera Technologies and Innovations at VISION 2022 VMP Launches ER-HCM Series Horizontal Cable Manager SystemArticles Lowering the Barrier to Entry with "Robotics-as-a-Service" (RaaS) Random Depalletization Powering Drones with Improved Mobile Mapping Systems ATI Industrial Automation at IMTS 2022 How Simulation Enhances the Offline Programming Experience FEM simulations Using FEM simulations, engineers and product developers have a 3D visual oof how the product behaves within a magnetic system. For example, in terms of the depth of a magnetic field or magnetic flux density on another -ferromagnetic- object. This not only validates the overall performance of a component, but also shows its magnetic performance. In this way, it is possible to optimise product performance, resulting in the best possible solution for a specific application. Such simulations accelerate the development and prototyping process because the shape, grade and size of a magnetic component can be quickly determined.

ATI Industrial Automation at IMTS 2022

How an Autonomous Machine Vision System Increased Accuracy and Cut Waste

How Simulation Enhances the Offline Programming Experience

Lowering the Barrier to Entry with "Robotics-as-a-Service" (RaaS)

Powering Drones with Improved Mobile Mapping Systems

International Manufacturing Technology Show - IMTS 2022

Subscribe | Search | Promote Products | Feature Your Company | Publish News | List Event

Articles | News | Stories | Products | Companies | Events

© 2010 - 2022 RoboticsTomorrow - All Rights Reserved Powered by BTH Management